FP-40W
White foaming pump with a broad curved actuator and rounded collar
FP-40 family: 40/400, 1.2 / 1.6 ml options; confirm selected specification.
Enquire about this style →Image 1 of 1 · Select the image to enlarge.
MODEL FP-40W
40/400 White Foaming Pump with a Wide Curved Actuator
A white foaming pump with a broad curved pressing surface, extended spout and rounded collar. This pictured reference is labelled FP-40W.
- Product number
- FP-40W
- Product type
- Foaming pump head
- Neck finish
- 40/400; confirm bottle drawing and sample fit
- Output options
- FP-40 family: 1.2 / 1.6 ml; confirm selected configuration
- Pictured design
- White foaming pump with a broad curved actuator and rounded collar
- Locking configuration
- FP-40 family described as turn on/off; verify operating position on samples
MOQ30,000 pcs
Lead time35–45 days
STYLE COLLECTION · 1 APPEARANCE REFERENCES
Pictured model and appearance
Compare each style below and include its reference in your inquiry.
Images have been cleaned up from catalog scans for appearance reference. Confirm the exact finish and construction with physical samples before approval.
PRODUCT DETAILS
Specifications & product description
| Specification item | Parameter / detail |
|---|---|
| Model / item no. | FP-40W |
| Product type | Foaming pump head |
| Neck finish | 40/400; confirm bottle drawing and sample fit |
| Output options | FP-40 family: 1.2 / 1.6 ml; confirm selected configuration |
| Pictured design | White foaming pump with a broad curved actuator and rounded collar |
| Locking configuration | FP-40 family described as turn on/off; verify operating position on samples |
| Component materials / dip tube | Confirm component specification, formula compatibility and tube length |
| Minimum order | 30,000 pcs |
| Lead time | 35–45 days |
Review the pictured foaming pump design
A white foaming pump with a broad curved pressing surface, extended spout and rounded collar. This pictured reference is labelled FP-40W.
| Catalog model | Pictured appearance | Overcap state |
|---|---|---|
| FP-40W | White foaming pump with a broad curved actuator and rounded collar | Shown without overcap |
Confirm the FP-40 configuration
The supplied catalog describes the FP-40 series as a turn on/off type with a 40/400 neck finish and 1.2 or 1.6 ml dosage options. These are family options, not two outputs assigned automatically to each photographed assembly. Request the selected specification and check the operating and locking positions with samples. The full neck drawing and sealing surface need to match your bottle; nominal diameter alone does not establish fit.
Approve the pictured head and finish
Use the pictured model and color as your selection reference, then confirm the actuator, collar, supplied cap configuration and component materials with an assembly specification. The cleaned scan images are for appearance reference; approve exact color, finish and construction with physical samples.
Check the dispenser with your formula and bottle
Share the intended foam-soap or personal-care formula and target output. Evaluate priming, foam consistency, delivered amount, actuation, leakage and repeated use with the actual liquid and container. Confirm closure engagement, installed head height, cap clearance where relevant and dip-tube length. Component materials and formula compatibility are not established by exterior color or appearance.
Prepare a quotation or sample request
Include the catalog model, bottle-neck drawing, intended formula, output target, tube length, preferred color, cap requirements, order quantity and destination. MOQ is 30,000 pieces and the stated lead time is 35–45 days. Confirm the selected configuration, sample approval and delivery requirements with your quotation.
BUYER INFORMATION
Ordering, lead time & samples
MOQ
30,000 pcs
Include the quantity per model, color or finish in your inquiry.
LEAD TIME
35–45 days
Share your delivery schedule and selected configuration with our team.
SAMPLES
Review the fit
Request samples to check dimensions, appearance and performance with your bottle or assembly.
PACKING & FREIGHT
Quote by destination
Tell us your destination and packing requirements. Carton details and freight arrangements are confirmed with your quotation.
Questions before ordering
Does the stated size guarantee compatibility?
Confirm the interface drawing and check samples with your bottle or assembly. Matching a nominal size does not guarantee a compatible fit.
What should I include in a quotation request?
Send the product or model, order quantity, dimensions, intended application, preferred finish and destination market. If a specification is not yet decided, our team can help review it.
What are the MOQ and lead time?
MOQ is 30,000 pcs. Lead time is 35–45 days. Include your required delivery schedule and customization details in your inquiry.
Request a quote or samples
Share your requirements so we can review the right configuration. You can also email [email protected].
Product: 40/400 White Foaming Pump with a Wide Curved Actuator
