UFP-33
Clear inverted-use foaming pump assembly shown without overcap
33/400; 0.4 ml; catalog describes upside-down operation
Enquire about this style →Image 1 of 1 · Select the image to enlarge.
MODEL UFP-33
33/400 Clear Foaming Pump for Upside-Down Dispensing
The clear UFP-33 foaming assembly is pictured in its inverted orientation. The catalog describes upside-down operation and lists 33/400, 0.4 ml and no cap for this reference.
- Product number
- UFP-33
- Product format
- Foaming pump head
- Neck finish
- 33/400
- Catalog output
- 0.4 ml
- Operating feature
- Catalog describes upside-down dispensing; test selected assembly and formula
- Overcap
- Without cap in the source
MOQ30,000 pcs
Lead time35–45 days
STYLE COLLECTION · 1 APPEARANCE REFERENCES
Pictured assembly and configuration
Compare each style below and include its reference in your inquiry.
Images have been cleaned up from catalog scans for appearance reference. Confirm the exact finish and construction with physical samples before approval.
PRODUCT DETAILS
Specifications & product description
| Specification item | Parameter / detail |
|---|---|
| Model / item no. | UFP-33 |
| Product format | Foaming pump head |
| Neck finish | 33/400 |
| Catalog output | 0.4 ml |
| Operating feature | Catalog describes upside-down dispensing; test selected assembly and formula |
| Overcap | Without cap in the source |
| Dimensions / internal materials | Confirm complete assembly drawing, wetted parts and tube length |
| Minimum order | 30,000 pcs |
| Lead time | 35–45 days |
Review the pictured foaming packaging
The clear UFP-33 foaming assembly is pictured in its inverted orientation. The catalog describes upside-down operation and lists 33/400, 0.4 ml and no cap for this reference.
| Source reference | Pictured appearance | Catalog specification / status |
|---|---|---|
| UFP-33 | Clear inverted-use foaming pump assembly shown without overcap | 33/400; 0.4 ml; catalog describes upside-down operation |
Match the complete assembly specification
Use the source model and the parameters shown in the table as your selection brief. Confirm the complete neck drawing, sealing surface, installed height and tube length on the actual bottle. For a bottle set, specify the required bottle material, nominal capacity, pump configuration and cap. Family output options need to be confirmed for the selected assembly.
Approve the pictured design with samples
The images have been cleaned from the supplied catalog scan. Use them to compare the actuator, collar and cap, then approve the exact color, finish, component construction and dimensions with physical samples. Exterior appearance does not establish wetted-part materials or formula compatibility.
Check performance with the intended formula
Evaluate priming, foam consistency, delivered amount, repeated actuation, leakage and transport with your actual formula and container. For inverted-use or turn on/off references, check the stated operating feature on the selected sample under the intended use conditions. Confirm component compatibility and packaging requirements before production approval.
Prepare a quotation or sample request
Send the model or local appearance reference, complete bottle-neck drawing, intended formula, output target, bottle capacity and material where applicable, cap preference, tube length, color, quantity and destination. MOQ is 30,000 pieces and the stated lead time is 35–45 days. Confirm the selected configuration, sample approval and delivery schedule with your quotation.
BUYER INFORMATION
Ordering, lead time & samples
MOQ
30,000 pcs
Include the quantity per model, color or finish in your inquiry.
LEAD TIME
35–45 days
Share your delivery schedule and selected configuration with our team.
SAMPLES
Review the fit
Request samples to check dimensions, appearance and performance with your bottle or assembly.
PACKING & FREIGHT
Quote by destination
Tell us your destination and packing requirements. Carton details and freight arrangements are confirmed with your quotation.
Questions before ordering
Does the stated size guarantee compatibility?
Confirm the interface drawing and check samples with your bottle or assembly. Matching a nominal size does not guarantee a compatible fit.
What should I include in a quotation request?
Send the product or model, order quantity, dimensions, intended application, preferred finish and destination market. If a specification is not yet decided, our team can help review it.
What are the MOQ and lead time?
MOQ is 30,000 pcs. Lead time is 35–45 days. Include your required delivery schedule and customization details in your inquiry.
Request a quote or samples
Share your requirements so we can review the right configuration. You can also email [email protected].
Product: 33/400 Clear Foaming Pump for Upside-Down Dispensing
